| Product name and usage |
Description |
Code |
Size |
Price |
Oil Treatment
(Lower Engine Anti-Friction Metal Conditioner)
Use one bottle when you change your
oil and filter at least every two or three oil changes.
|
Contains no suspended solids such as Teflon (P.T.F.E.), Graphite or Moly
No films or coatings that can plug filters or cause corrosive build-up
Improved engine efficiency
Reduced operation costs
Reduce engine heat by reducing friction and increasing heat transfer
Formulated to blend with petroleum or synthetic oils
Conditions metallic surfaces to repel metal
Increased fuel economy by improved glide
Reduces maintenance cost by reducing drag
Reduces cold start wear with easy turnover
Could improve engine power
|
5402
5452 |
360ml
19litre |
£14.81
571.64 |
| Diesel Engine Treatment
For first time treatment, add entire
contents into fuel tank and fill with fuel. Treats up to 14 gallons
(64 litres of diesel. To maintain, add 3-4 oz. (90-120ml) per tankful,
if Cummins L-10 superior rating is desired, add 6 oz. (180ml) per tankful. |
Suitable for any diesel engine
Increased fuel economy
Decreased engine noise
Decreased power
Decreased smoke
Cleaner fuel injectors and pistons
Lower emissions
Easier engine start
Higher cetane number
Better cold start
Less noise
|
5470
5434 |
360ml
l9litre |
£14.81
£571.64 |
| Manual Gearbox Treatment/Superglide Manual
Transmission and Differential Treatment
Change gear oil and add Super
Glide to new oil. |
Meets and exceeds MIL-L-2105C and API service classification GL-2-GL5
Dramatically reduced friction
Reduced downtime
Increased available horsepower
Reduced maintenance
Reduced noise levels
Extended service life
Increased fuel efficiency
Reduced operating temperatures
Extended drain cycles
|
5406
5426 |
360ml
19litre |
£314.81
£571.64 |
| Petrol Engine Treatment
To rejuvenate, use one bottle every
six months per tankful of petrol. To maintain, use 1-2oz/30-60ml
per tankful (1.3 gallon/61 litre tank). |
Increased power and acceleration
Increased fuel economy
Saves money
Helps stop knock, ping and after-run
Increased RPM and horsepower
Helps dramatically reduce emissions
Eliminates stalling, rough idle and hesitate
Will not harm catalytic converters or oxygen sensors
Dissolves internal engine sludge, gum and varnish build-up
Increases fuel burn and eliminates "dry starts" and "cold starts"
Extends the life of the engine
|
5404
5454 |
360ml
19litre |
£14.81
£571.64 |
Automatic Gearbox Fluid
(Automatic Transmission Plus)
Allow transmission to warm.
Add one 12oz 360 ml bottle of AT Plus
through the fill spout. (Do not overfill transmission). Repeat
at fluid change or evey 24=5,000 mi/40,000 km to 50,000 mi/80,000km.
|
Increased performance in shifting gears
Reduced seal leakage
Reduced slippage
Reduced heat load
Dramatically reduced maintenance costs
Revitalised O-rings and seals
Reduced downtime
Reduced gum and varnish build-up
Extended drain cycles
|
5408
5448 |
360ml
19litre |
£14.81
£571.64 |
